T - LINE
Optical Transceiver Indonesia
T-Line Transceiver is highly product that contain with Optical Transceivers (10/100/1G/10G/40G/100G), Copper DAC/AOC O(10G/40G/100G), MUX/DEMUX (C/WDM Single/Dual)
Compatible with CISCO, Juniper, Huawei, 3COM, Extreme, HP, H3C, NORTEL, Brocade, Foundry, Enterasys, Avaya, Alcatel, D-Link, Niagara Networks, Allied Telesis, Netgear, Keysight, Netscout, etc
25G SFP28
T-Line SFP-25G SFP28 transceivers are high performance, cost effective modules supporting data rate of 25.78Gbps and 20km transmission distance with SMF. The transceiver consists of three sections: a Cooled EML laser transmitter, a APD photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi-Source Agreement and SFF-8472 digital diagnostics functions.
Country Of Origin : China
Delivery Time : Consult
Dimensions (LxWxH ) : 57.5*14.3*12.7
Net weight : 0.025kg
40G QSFP+ SR 850nm/910nm 100m Bi-Directional Receiver Module
T-Line QSFP-40G-BD receiver integrates receiver on one module. It is a two-Channel, Pluggable, LC Duplex, Fiber-Optic QSFP+ Transceiver for 40 Gigabit Ethernet Applications. This transceiver is a high performance module for short-range duplex data communication and interconnect applications. It integrates four electrical data lanes in each direction into transmission over a single LC duplex fiber optic cable. Each electrical lane operates at 10.3125 Gbps and conforms to the 40GE XLPPI interface. The transceiver internally multiplexes an XLPPI 4x10G interface into two 20Gb/s electrical channels, receiving each optically over one simplex LC fiber using bi-directional optics. This results in an aggregate bandwidth of 40Gbps into a duplex LC cable. This allows reuse of the installed LC duplex cabling infrastructure for 40GbE application. Link distances up to 100 m using OM3 and 150m using OM4 optical fiber are supported. These modules are designed to operate over multi-mode fiber systems using a nominal wavelength of 850nm on one end and 900nm on the other end. The electrical interface uses a 38 contact QSFP+ type edge connector. The optical interface uses a conventional LC duplex connector.
Country Of Origin : China
Delivery Time : Consult
Dimensions (LxWxH ) : 120.77*18.5*13.2
Net weight : 0.043kg
40G QSFP+ SR4 850nm 100m MMF Transceivers
T-Line QSFP-40G-SR4 is a parallel 40Gbps Quad Small Form-factor Pluggable (QSFP) optical module that provides increased port density and total system cost savings. The QSFP full-duplex optical module offers 4 independent transmit and receive channels, each capable of 10Gbps operation for an aggregate bandwidth of 40Gbps 100m on OM3 Multi-mode Fiber (MMF) and 150m on OM4 MMF. An optical fiber ribbon cable with an MPO/MTP connector at each end plugs into the QSFP module receptacle. The orientation of the ribbon cable is “keyed” and guide pins are present inside the module’s receptacle to ensure proper alignment. The cable usually has no twist (key up to key up) to ensure proper channel to channel alignment. Electrical connection is achieved though a z-pluggable 38-pin IPASS® connector.
Country Of Origin : China
Delivery Time : Consult
Dimensions (LxWxH ) : 120.77*18.5*13.2
Net weight : 0.043kg
40G QSFP+ LR4 CWDM4 10km Transceiver
T-Line QSP-40G-LR is a transceiver module designed for 10km optical communication applications. The design is compliant to 40GBASE-LR4 of the IEEE P802.3ba standard. The module converts 4 inputs channels (ch) of 10Gb/s electrical data to 4 CWDM optical signals, and multiplexes them into a single channel for 40Gb/s optical transmission. Reversely, on the receiver side, the module optically de-multiplexes a 40Gb/s input into 4 CWDM channels signals, and converts them to 4 channel output electrical data. The central wavelengths of the 4 CWDM channels are 1271, 1291, 1311 and 1331nm as members of the CWDM wavelength grid defined in ITU-T G694.2. It contains a duplex LC connector for the optical interface and a 38-pin connector for the electrical interface. To minimize the optical dispersion in the long-haul system, single-mode fiber (SMF) has to be applied in this module. The product is designed with form factor, optical/electrical connection and digital diagnostic interface according to the QSFP Multi-Source Agreement (MSA). It has been designed to meet the harshest external operating conditions including temperature, humidity and EMI interference. The module operates from a single +3.3V power supply and LVCMOS/LVTTL global control signals such as Module Present, Reset, Interrupt and Low Power Mode are available with the modules. A 2-wire serial interface is available to send and receive more complex control signals and to obtain digital diagnostic information. Individual channels can be addressed and unused channels can be shut down for maximum design flexibility.
Country Of Origin : China
Delivery Time : Consult
Dimensions (LxWxH ) : 120.77*18.5*13.2
Net weight : 0.043kg
40G /100G QSFP28 SR BD RX 850nm/910nm 100M Transceivers
T-Line QSFP28-100G-BD dual-rate BiDi RX transceiver can function as a 40Gb BiDi, matching its reach of 100m and 150m over OM3 and OM4 multi-mode fiber, respectively. In 100Gb mode, the dual-rate BiDi’s reach is 70m and 100m on OM3 and OM4, respectively. In both modes, the BiDi reach matches its SR4 counterpart. As a single transceiver with these two modes of operation, the Cisco dual-rate BiDi enables data center operators to re-use their existing duplex LC-connectorized MMF infrastructure for migration
Country Of Origin : China
Delivery Time : Consult
Dimensions (LxWxH ) : 120.77*18.5*13.2
Net weight : 0.043kg
100G QSFP28 SR4 850nm 100m Transceivers
T-Line QSFP28-100G-SR4 transceiver modules are designed for use in 100 Gigabit Ethernet, 128GFC and 4x28G OTN client links over multimode fiber. They are compliant with the QSFP28 MSA 128GFC and IEEE 802.3bm 100GBASE-SR4 and CAUI-4. Digital diagnostics functions are available via the I2C interface as specified by the QSFP28 MSA.
Country Of Origin : China
Delivery Time : Consult
Dimensions (LxWxH ) : 120.77*18.5*13.2
Net weight : 0.043kg
100G QSFP28 LR4 LWDM4 10km Transceivers
T-Line QSFP28-100G-LR4 transceiver module is designed for use in 100 Gigabit Ethernet links on up to 10km of single mode fiber. It is compliant with the QSFP28 MSA, IEEE 802.3ba 100GBASE-LR4 and IEEE 802.3bm CAUI-4. Digital diagnostics function is available via the I2C interface, as specified by the QSFP+ MSA.
Country Of Origin : China
Delivery Time : Consult
Dimensions (LxWxH ) : 120.77*18.5*13.2
Net weight : 0.043kg